The application of cutting fluid in the field of engineering manufacturing has a history of hundreds of years, and it plays a vital role in the processing efficiency and surface quality of parts. Among them, water-based cutting fluid accounts for more than 90% of the consumption of cutting fluid. However, long-term recycling of water-based cutting fluid could easily cause deterioration, and the breeding of bacteria could cause the cutting fluid to fail, increase manufacturing costs, and even endanger the health of workers. Traditional bactericides could improve the biological stability of cutting fluids, but they are toxic to the environment and do not conform to the development trend of low-carbon manufacturing. Low-carbon manufacturing is inevitable and the direction of sustainable manufacturing. The use of nanomaterials, transition metal complexes, and physical sterilization methods on the bacterial cell membrane and genetic material could effectively solve this problem. In this article, the mechanism of action of additives and microbial metabolites was first analyzed. Then, the denaturation mechanism of traditional bactericides on the target protein and the effect of sterilization efficiency were summarized. Further, the mechanism of nanomaterials disrupting cell membrane potential was discussed. The effects of lipophilicity and the atomic number of transition metal complexes on cell membrane penetration were also summarized, and the effects of ultraviolet rays and ozone on the destruction of bacterial genetic material were reviewed. In other words, the bactericidal performance, hazard, degradability, and economics of various sterilization methods were comprehensively evaluated, and the potential development direction of improving the biological stability of cutting fluid was proposed.
Manufacturing Engineering And Technology6th Edition Solution ManualManufacturing engineering and technology - Schmid and Kalpakjian. The grains represent lead insolid solution in copper, and the particles are lead. Manufacturing Engineering And Technology6th Edition by Kalpakjian, Serope, Schmid, Textbook Latest Solution Manual Test Banks This isjust sample list.
Manufacturing Engineering And Technology 6th Editionpdf
Available. MANUFACTURINGENGINEERING AND TECHNOLOGY 6THEDITION SOLUTION. MANUAL P. PDF.Available. KALPAKJIANMANUFACTURING.KALPAKJIAN MANUFACTURING PROCESSES SOLUTIONMANUAL. Format : SOLUTION MANUFACTURING PROCESSESAND MATERIALS 4TH EDITION MANUFACTURINGENGINEERING AND TECHNOLOGY 6TH SOLUTION. If you arelooking for a test bank or a solution manual for your academic textbookManufacturing Engineering & Technology, 6th Edition, Kalpakjian,Schmid. We also provide a lot of books, user manual, or guidebook thatrelated. Solution 2 Upper MANUFACTURING ENGINEERINGTECHNOLOGY 6TH EDITION. Electronics Technology Fundamentals:Conventional Flow Version (3rd Edition) 2012 MyHospitalityLab withPearson eText -- Access Card Package (6th Edition) Atmosphere : AnIntroduction to Meteorology, Books a la Carte Edition Solution Manualin theToyota Production System Lean Manufacturing - PowerPoint.Solution Manual Classical Mechanics (Douglas Gregory) SolutionManual Update Edition (Sheppard & Tongue) Solution ManualDynamics : Analysis and Schmid) Solution Manual Manufacturing,Engineering & Technology (6th Ed. Manufacturing engineering andtechnology kalpakjian solution manual.rar (Full version) Manufacturing,Engineering and Technology SI 6th Edition Serope.
Electrical engineering 6th edition solutions manual hambley is anindispensable tool, useful for can even call the manufacturing serviceand find the manual for the product. ELECTRICAL CIRCUITTHEORY TECHNOLOGY 5TH EDITION.
If your wanted solutions manual ins't on this list, also can ask me ifFundamentals of Engineering Thermodynamics, 6th Ed (Michael J.Moran, _ Howard N. Shapiro) Smith) _ Manufacturing, Engineering &Technology (4th Ed. Kalpakjian & Smith) An Introduction toProgramming with Visual Basic 6.0, Update Edition -form/m/microelectronic-circuits-sedra-smith-6th-edition-solution-manual.pdf /manufacturing-engineering-technology-sixth-edition-solution.pdf 2012-04-10. ( Instructor's Solutions Manual ) A First CourseIn Probability 7th Edition by Sheldon ( Instructor's Solutions Manual )Chemical Engineering Volume 1, 6th Edition, ( Instructor's SolutionsManual ) Fundamentals of Manufacturing 2nd Edition by ( Instructor'sSolutions Manual ) Managing Engineering and Technology (4th.SOLUTIONS MANUAL: A First Course in Probability Theory, 6thedition, by S. Ross. SOLUTIONS MANUAL: Advanced EngineeringMathematics, 6th Edition by SOLUTIONS MANUAL: Fundamentals ofModern Manufacturing 3rd Ed by SOLUTIONS MANUAL: ManagingEngineering and Technology (4th, Morse.
MANUFACTURING ENGINEERING AND TECHNOLOGY 6THEDITION SOLUTION. MANUAL. edition solutions manual, and nowother manuals guide and experience plus more MANUFACTURINGENGINEERING AND TECHNOLOGY 6TH EDITION. -circuits-sedra-smith-6th-edition-solution-manual.pdf 2015-02-22 03:10:17/manufacturing-engineering-technology-sixth-edition-solution.pdf 2015-02-04.
A. B. Yu (guest editor), Computational Modelling in Mineral Processing, Minerals Engineering, 22 (2009) 879-1000.
L. McElroy, J. Bao, R.Y. Yang and A.B. Yu, A Soft-Sensor Approach to Flow Regime Detection for Milling Processes, Powder Technology, 188 (2009) 234-241. (pdf)
X. F. Dong, A. B. Yu, J. Burgess, D. Pinson, S. Chew, P. Zulli, Modelling of the multiphase flow in ironmaking blast furnace, Industrial & Engineering Chemistry Research, 48 (2009) 214-226. (pdf)
R. Kydd, W. Y. Teoh, Y. Wang, K. Wong, Q. H. Zeng, J. Scott, A. B. Yu, J. Zou and R. Amal, Flame-Synthesized Ceria-Supported Copper Dimers for Preferential Oxidation of CO, Advanced Functional Materials, 19 (2009) 369-377. (pdf)
Y.S. Shen, B.Y. Guo, A.B. Yu and P. Zulli, A three-dimensional numerical study of the combustion of coal blends in blast furnace, Fuel, 88 (2009) 255-263. (pdf)
B. Y. Guo, K. J. Dong, K. W. Chu and A. B. Yu, A. Vince and I. Brake, A numerical model for the liquid flow in a sputnik coal distributor, Minerals Engineering, 22 (2009) 78-87. (pdf)
X.F. Dong, T. Pham, A.B. Yu, P. Zulli, Flooding diagram for multi-phase flow in a moving bed, ISIJ International, 49 (2009) 189-194. (pdf)
R. S. Liu, H. R. Liu, K. J. Dong, Z. Y. Hou, Z. A. Tian, P. Peng, A. B. Yu, Simulation study of size distributions and magic number sequences of clusters during the solidification process in liquid metal Na, Journal of Non-Crystalline Solids, 355 (2009) 541-547. (pdf)
H.P. Zhu, Z.Y. Zhou, A.B. Yu, P. Zulli, Stress Fields of Solid Flow in a model Blast Furnace, Granular Matter, 11 (2009) 269-280. (pdf)
B. Y. Guo, K. J. Dong and A. B. Yu, Optimisation of Sputnik Distributor Using Numerical Method, Int J. Computational Fluid Dynamics, 23 (2009) 119-135. (pdf)
X.C. Jiang, A.B. Yu, Synthesis of Pd/?-Fe2O3 nanocomposites for catalytic CO oxidation, J. Materials Processing Technology, 209 (2009) 4558-4562. (pdf)
Z. Y. Zhou, A. B. Yu and P. Zulli, Particle Scale Study of Heat Transfer in Packed and Bubbling Fluidized Beds, AIChE Journal, 55 (2009) 868-884. (pdf)
B. Wang, K.W. Chu, A.B. Yu and A. Vince, Modelling the multiphase flow in a dense medium cyclone, Industrial & Engineering Chemistry Research, 48 (2009) 3628-3639. (pdf)
Z. A. Tian, R. S. Liu, P. Peng, Z. Y. Hou, H. R. Liu, C. X. Zheng, K. J. Dong, A. B. Yu, Freezing structures of free silver nanodroplets: A molecular dynamics simulation study, Physics Letters A 373 (2009) 1667-1671. (pdf)
K.W. Chu, B. Wang, A.B. Yu and A. Vince, CFD-DEM Modelling of Multiphase Flow in Dense Medium Cyclones, Powder Technology, 193 (2009) 235-247. (pdf)
G. R. Chandratilleke, A. B. Yu, R. L. Stewart and J. Bridgwater, Effects of blade rake angle and gap on mixing in a cylindrical mixer, Powder Technology, 193 (2009) 303-311. (pdf)
K. J. Dong, R. Y. Yang, R. P. Zou, X. Z. An and A. B. Yu, Critical states and phase diagram in the packing of uniform spheres, Europhysics Letters (EPL), 86 (2009) 46003 (6 pages). (pdf)
Y.S. Shen, B.Y. Guo, A.B. Yu and P. Zulli, Model study of the effects of coal properties and blast conditions on coal combustion, ISIJ International, 49 (2009) 819-826. (pdf)
L. McElroy, J. Bao, R.Y. Yang and A.B. Yu, Soft-sensors for prediction of impact energy in horizontal rotating drum, Powder Technology, 195 (2009) 177-183. (pdf)
P.A. Eidem, M. Runde, M. Tangstad, J.A. Bakken, Z.Y. Zhou and A.B. Yu, Effect of contact resistance on bulk resistivity of dry coke beds, Metallurgical Transaction B, 40 (2009) 388-396. (pdf)
S. Nag, S. Basu and A.B. Yu, A static approach towards coke collapse modelling in blast furnace, Ironmaking and Steelmaking, 36 (2009) 509-514. (pdf)
X. C. Jiang, Q. H. Zeng and A. B. Yu, Silver Nanoplates: Synthesis, Growth and Functional Properties (Chapter 17, 38 pages), New Nanotechnology Developments (Editor: Armando Barran), 2009, Nova Science Publishers, ISBN: 978-1-60741-028-7.
C. K. Ho, S. M. Wu, H. P. Zhu, A. B. Yu and S. T. Tsai, Experimental and Numerical Investigations of Blast Furnace Burden Distribution, Minerals Engineering, 22 (2009) 986-994. (pdf)
B. Wang, K. W. Chu, A. B. Yu and A. Vince, Numerical Studies of the Effects of Medium Properties in Dense Medium Cyclone Operations, Minerals Engineering, 22 (2009) 931-943. (pdf)
K. J. Dong, R. P. Zou, R. Y. Yang, A. B. Yu and G. Roach, DEM simulation of cake formation and growth in sedimentation and filtration, Minerals Engineering, 22 (2009) 921-930. (pdf)
C. T. Jayasundara, R.Y. Yang, B.Y. Guo, A.B. Yu, J. Rubenstein, Effect of slurry flow on particle motion in Isamill, Minerals Engineering, 22 (2009) 886-892. (pdf)
H. P. Zhu, M. Rahman, A. B. Yu, J. Bridgwater, and P. Zulli, Numerical Investigation of Particle Percolation in a Packed Bed, Minerals Engineering, 22 (2009) 961-969.
K J Dong, A B Yu, I Brake, DEM simulation of particle flow in mult-deck banana screens, Minerals Engineering, 22 (2009) 910-920. (pdf)
D.C.D. Nath, S. Bandyopadhyay, A.B. Yu, Q.H. Zeng, T. Das, D. Blackburn and C. White, Structure-property interface correlation of fly ash-isotactic polypropylene composites, J. Materials Science, 44 (2009) 6078-6089. (pdf)
K. W. Chu, B. Wang, A. B. Yu, A. Vince, G. D. Barnett and P. J. Barnett, Effect of Coal Particle Density Distribution on Dense Medium Cyclone Performance, Minerals Engineering, 22 (2009) 893-909.
C. Y. Chen, X. D. Sun, X. C. Jiang, D. Niu, A. B. Yu, Z. G. Liu, J. G. Li, A Two-step Hydrothermal Synthesis Approach to Monodispersed Colloidal Carbon Spheres, Nanoscale Research Letters, 4 (2009) 971-976. (pdf)
S. Mrayed, Q.H. Zeng and A.B. Yu, Interfacial interactions in clay-based nylon 6 nanocomposites: a density functional theory study, Computational Materials Science, 46 (2009) 942-949. (pdf)
X.F. Dong and A.B. Yu, Numerical analysis of the heterogeneous gas-solid flow in fluidized beds, J. Taiwan Institute of Chemical Engineers, 40 (2009) 645-653. (pdf)
S. B. Kuang, A. B. Yu, and Z. S. Zou, Computational study of flow regimes in vertical pneumatic conveying, Industrial & Engineering Chemistry Research, 48 (2009) 6846-6858. (pdf)
H.J. Yang, L. Yuan, G. S. Zhu, H. R. Xu, and A. B. Yu, Luminescent Properties of YAG:Ce3+ Phosphor Powders Prepared by Hydrothermal-Homogeneous Precipitation Method, Materials Letters, 63 (2009) 2271-2273. (pdf)
D. Maldonado, P. Zulli, P. Austin, M. Walsh, J. Mathieson, B.Y. Guo, A.B. Yu, H. Rogers, Optimisation of the Design of Pulverised Coal Injection Lances: From Concept to Full Scale Implementation at BlueScope Steel's BF 6, Journal of Iron and Steel Research International, 16 (2009) 793-799.
B.Y. Guo, Z. Paul, D. Maldonado, A.B. Yu and Y.S. Shen, Modelling of Titanium Compound Formation in Blast Furnace Hearth, Journal of Iron and Steel Research International, 16 (2009) 851-856.
Y.S. Shen, B.Y. Guo, A.B. Yu, A. Austin, P. Zulli, Modelling in-Furnace Phenomena of Coal/Coke Combustion in a Blast Furnace: Effects of Coal Properties, Journal of Iron and Steel Research International, 16 (2009) 1137-1142.
X.Z. An, CX Li, R.Y. Yang, R.P. Zou and A.B. Yu, Experimental study of the packing of mono-sized spheres subjected to one-dimensional vibration, Powder Technology, 196 (2009) 50-55. (pdf)
X.Z. Liu, X. Li, A.B. Yu and W.J. Wang, Preparation and tribological performance of electrodeposited Ni-TiB2-Dy2O3 composite coatings, Journal of Rare Earths, 27 (2009) 480-485. (pdf)
Z.B. Tong, R.Y. Yang, A.B. Yu, S. Adi, and H.K. Chan, Numerical modelling of the breakage of loose agglomerates of fine particles, Powder Technology, 196 (2009) 213-221. (pdf)
H.P. Zhu, Q.F Hou, Z. Y. Zhou and A. B. Yu, Averaging method of particulate systems and its application to particle-fluid flow in a fluidized bed (Invited contribution), Chinese Sci. Bull., 54 (2009) 4309-4317. (pdf)
K. Wong, Q. H. Zeng, and A. B. Yu, Gold catalysts: a new insight into the molecular adsorption and CO oxidation, Chemical Engineering Journal, 155 (2009) 824-828. (pdf)
Y.S. Shen, D. Maldonado, B.Y. Guo, A. B. Yu, P. Austin and P. Zulli, CFD study of pulverised coal combustion in blast furnace raceway, Industrial & Engineering Chemistry Research, 48 (2009) 10314-10323.
X. C. Jiang, A. B. Yu, W. R. Yang, Y. Ding, C. X. Xu, and S. Lam, Synthesis and Growth of Hematite Nanodiscs through a Facile Hydrothermal Approach, Journal of Nanoparticle Research, 2009 (in press:10.1007/s11051-009-9636-8., accepted in April 2009). (pdf)
D.C.D. Nath, S. Bandyopadhyay, A.B. Yu, D. Blackburn and S. Varughese, Isothermal crystallization kinetics of fly ash filled iso-polypropylene composite - a new physical approach, Journal of Thermal Analysis and Calorimetry, 2009 (in press, accepted in July). (pdf)
B. Wang and A. B. Yu, Computational investigation of the mechanisms of particle separation and "fish-hook" phenomenon in hydrocyclones, AIChE Journal, 2009 (in press, accepted in Oct). (pdf)
X.C. Jiang, C.Y. Chen, W.M. Chen and A.B. Yu, Role of citric acid in the formation of si9lver nanoplates through a synergistic reduction approach, Langmuir, 2009 (in press, accepted in Nov). (pdf)
X. F. Dong, A. B. Yu, S. J. Chew and P. Zulli, Modelling of Blast Furnace with Layered Cohesive Zone, Metallurgical Transaction B, 2009 (in press, accepted in Nov). (pdf)
Z.B. Tong, R.Y. Yang, K.W. Chu, A.B. Yu, S. Adi and H.K. Chan, Numerical study of the effects of particle size and polydispersity on the agglomerate dispersion in a cyclonic flow, Chemical Engineering Journal, 2009 (in press, accepted in Nov). (pdf)
D.C.D. Nath, S. Bandyopadhyay, S. Gupta, A.B. Yu, D. Blackburn and C. White, Surface coated fly ash used as filler in biodegradable polyvinyl alcohol composite films: Part 1 - the modification process, Applied Surface Science, 2009 (in press). (pdf)
D.C.D. Nath, S. Bandyopadhyay, A.B. Yu, D. Blackburn and C. White, High-strength biodegradable poly(vinyl, alcohol)/fly ash Composite films, Journal of Applied Polymer Science, 2009 (in press). (pdf)
X.F.Dong, A.B. Yu, J.M.Burgess, Modelling of multiphase flow in ironmaking blast furnace, Ind.Eng.Chem.Res. 2009,48,214-226. (pdf)
P.A. Eidem, M, Runde, M.Tangtad, J.A.Bakken,Z.Y.Zhou, A.B.Yu, Effect of contact resistance on bulk resistivity of dry coke beds, Metallugical and materials transcations B, 2009,40B,388-396. (pdf)
A.B.Yu, Forward, Minerals engineering, 2009,22,879. (pdf)
A Vince, K. Chu, B. Wang, A. B. Yu, P. J. Barnett and G. D. Barnett, "Operational Implications of Dense Medium Cyclone Multiphase Flow Modeling", Proceedings Coal Preparation Conference, Lexington, USA, May 2009.
K. J. Dong, S. B. Kuang, A. Vince, T. Hughes and A. B. Yu, Numerical Simulation of the In-Line Pressure Jig Unit in Coal Preparation, Physical Separation 09, Falmouth, UK, June 2009 (CD Rom Edition).
K.W. Chu, B. Wang, A.B. Yu and A. Vince, CFD-DEM Study of the Multiphase Flow in a Dense Medium Cyclone: the Effect of Particle Density, Physical Separation 09, Falmouth, UK, June 2009 (CD Rom Edition).
Z.B. Tong, R.Y. Yang, , A.B. Yu, S. Adi, H.K. Chan, Numerical Investigation of Effects of Powder Size and Polydispersity on the Dispersion of Fine Powders, Proc. 9th International Symposium on Agglomeration and 4th International Granulation Workshop, Sheffield, UK, June 2009 (CD Rom Edition).
Q. F. Hou, Z. Y. Zhou, A. B. Yu, Investigation of Heat Transfer in Bubbling Fluidization with an Immersed Tube, Proc. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi'an, China, July 2009, Paper No. FG-32 (CD Rom Edition).
B. Y. Guo, Y. S. Shen, Daniel Maldonado , Paul Zulli and A. B. Yu, Modeling Solid Precipitation in Blast Furnace Hearth, Proc. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi'an, China, July 2009, Paper No. MF-17 (CD Rom Edition).
K. W. Chu, B. Wang, A. B. Yu, D. L. Xu and Y. X. Chen, Discrete Particle Simulation of Gas-Solid Flow in a Cyclone Separator, Proc. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi'an, China, July 2009, Paper No. MF-18 (CD Rom Edition).
B. Wang, K. W. Chu, A. B. Yu, A. Vince, G.D. Barnett and P.J. Barnett, Numerical Study of the Effect of Vortex Finder Configuration in Dense Medium Cyclones, Proc. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi'an, China, July 2009, Paper No. MF-19 (CD Rom Edition).
A. B. Yu, Particle Scale Modelling and Simulation of Complex Multiphase Flows, Proc. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Plenary Presentation, Xi'an, China, July 2009, Paper No. PL-03 (CD Rom Edition).
H. P. Zhu, K. J Dong,, A. B. Yu, R. P. Zou and G. Roach, Numerical simulation of the flow of fine particles in a hopper, Proc. Of 6th International Conference on Micromechanics of Granular Media (Powders and Grains 2009), Golden, Colorado, USA, July 2009, pp. 661-664.
S. M. Wu, H.P. Zhu, A.B. Yu, A. de Ryck and P. Zulli, DEM simulation of surface flow on a granular pile, Proc. Of 6th International Conference on Micromechanics of Granular Media (Powders and Grains 2009), Golden, Colorado, USA, July 2009, pp. 671-674.
P.Y. Liu, R.P. Zou, A.B. Yu, R.Y. Yang, Numerical Study of Wet Particle Flow in a Rotating drum, POWDERS AND GRAINS 2009, Book Series: AIP Conference Proceedings, Volume: 1145 Pages: 613-616 Published: 2009.
R. Chandratilleke, A. B. Yu, J. Bridgwater and K. Shinohara, Investigation of Particle Mixing in a Vertical Bladed-Mixer, Proc. Of 6th International Conference on Micromechanics of Granular Media (Powders and Grains 2009), Golden, Colorado, USA, July 2009, pp. 807-810.
Z.B. Tong, R.Y. Yang, , A.B. Yu, S. Adi, H.K. Chan, Numerical Study of Effects of Powder Size and Polydispersity on the Dispersion of Fine Powders in a Cyclonic Flow, Proc. Of 6th International Conference on Micromechanics of Granular Media (Powders and Grains 2009), Golden, Colorado, USA, July 2009, pp. 807-810.
Z.Y. Zhou and A.B. Yu, Simulation of the Flow and Segregation of Particle Mixtures in Liquid Fluidization, Proc. Of 6th International Conference on Micromechanics of Granular Media (Powders and Grains 2009), Golden, Colorado, USA, July 2009, pp. 993-996.
S.B. Kuang, A.B. Yu and Z.S. Zou, Flow Regimes in Vertical Pneumatic Conveying, Proc. Of 6th International Conference on Micromechanics of Granular Media (Powders and Grains 2009), Golden, Colorado, USA, July 2009, pp. 1005-1008.
B.S. Xia, H.P. Zhu, A.B. Yu, and P. Zulli, DEM simulation of granular flow in a 3D Cuboid hopper, Proc. 6th International Conference for Conveying and Handling of Particulate Solids, Brisbane, Australia, Aug 2009 (in press).
X. Wang, H.P. Zhu and A.B. Yu, Stress inhomogeneity of solid flow in annular shear cell, Proc. 6th Int. Conference for Conveying and Handling of Particulate Solids, Brisbane, Australia, Aug 2009 (in press).
P.Y. Liu, R.Y. Yang and A.B. Yu, Numerical Study of the Effect of Liquid Surface Tension on the Flow of Wet Particles in a Rotating Drum, Proc. 6th International Conference for Conveying and Handling of Particulate Solids, Brisbane, Australia, Aug 2009 (in press).
S.B. Kuang , A.B. Yu , Computer Simulation of Flow Regime in Pneumatic Conveying, Proc. 6th Int. Conference for Conveying and Handling of Particulate Solids, Brisbane, Australia, Aug 2009 (in press).
A. B. Yu, Powder Technology Research in Australia, 8th International Congress on Chemical Engineering, keynote presentation, Montral, Canada, Aug 2009 (to be published).
Q.H. Zeng and A.B. Yu, Toward a Multiscale Understanding of the Structures of Nanoparticle-Polymer Nanocomposites, 8th International Congress on Chemical Engineering, keynote presentation, Montral, Canada, Aug 2009 (to be published).
A. B. Yu, Particle scale modelling and analysis of particle-fluid flow, Symposium on Multi-Scale Modelling for Industrial Flow Systems, Keynote Lecture, Melbourne, Australia, Dec 2009 (to be published).
Y.S. Shen, B.Y. Guo, A.B. Yu, P. Austin, P. Zulli, An Integrated Model of Coal/Coke Combustion in a Blast Furnace, 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion Xi'an, China, 11-15 July 2009 Paper No. MN-33.
Y. Feng, A.B. Yu, CFD-DEM MODELLING OF GAS FLUIDIZATION OF PARTICLE MIXTURES WITH SIZE AND DENSITY DIFFERENCES, Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 9-11 December 2009. pdf
Z. Y. Zhou, D. Pinson , R.P. Zou, A.B. Yu, CFD-DEM SIMULATION OF GAS FLUIDIZATION OF ELLIPSOIDAL PARTICLES, Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 9-11 December 2009.
Q. F. Hou, Z. Y. Zhou, A. B. Yu, COMPUTATIONAL STUDY OF HEAT TRANSFER IN BUBBLING FLUIDIZED BEDS WITH GELDART A POWDER, Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 9-11 December 2009.
K. W. Chu, B. Wang, A.B. Yu, A. Vince, MODELLING THE MULTIPHASE FLOW IN DENSE MEDIUM CYCLONES, Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 9-11 December 2009.
Q. F. Hou, B. Y. Guo, L.F. Li, A.B. Yu, NUMERICAL SIMULATION OF GAS FLOW IN AN ELECTROSTATIC PRECIPITATOR, Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 9-11 December 2009.
Baoyu Guo, Kejun Dong, Aibing Yu, SIMULATION OF LIQUID-SOLID FLOW IN A COAL DISTRIBUTOR: INHOMOGENEOUS MODEL VS HOMOGENEOUS MODEL, Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 9-11 December 2009.
2ff7e9595c
Comments